Electrolysis System DULCOLYSE

Output: up to 800 g/h

Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of beer, soft drinks and baby food. Maximum protection against corrosion and very good cost efficiency.

Innovative Disinfection. The Benefits For You: Minimum Chlorate and Chloride Content.

Excessive concentrations of chlorate in beverages and foodstuffs are harmful to human health and strictly regulated. They can be avoided in their entirety with ProMinent’s DULCOLYSE system. The disinfectant produced on-site ensures not just the lowest possible chlorate and chloride values, it is also a cost-effective alternative to conventional chemicals.

The system produces the highly effective disinfectant DULCOLYT 400, which delivers less than 0.01 ppm of chlorate for one 1 ppm of FAC (Free Available Chlorine). This is a considerably lower chlorate content than with conventional processes and is well below the target limit values.

Even the chloride by-product occurs in a much lower concentration than with conventional technologies, thereby preventing corrosion. The process ensures environmentally-friendly, highly effective disinfection and long-term freedom from germs without the need to transport, store and handle highly concentrated chemicals.

Your Benefits

  • Ultra-low chlorate content for disinfection with minimal by-products
  • Extremely low chloride content for maximum protection and freedom from corrosion within the plant
  • Environmentally friendly, highly effective disinfection
  • Long-term freedom from germs, without any transport, storage or handling of highly concentrated chemicals
  • Handling of chemicals is reduced (only sodium chloride is required)
  • Compact, space-saving design

Technical Details

  • Modern PLC with large display
  • Integrated Remote Control Engineer for remote diagnosis and troubleshooting
  • Supplied ready for connection in stainless steel housing
  • Duplex softening system
  • Salt-dissolving tank with level monitoring

Technical Data

Power supply: 1 x 230 Volt (V AC/1P/N/PE/50 Hz)

Dimensions (H x W x D): 2,100 x 1,250 x 610 mm

Type/output DULCOLYT production at 400 ppm Power uptake Salt solution tank volume Cabinet Order no.
g/h l/h kW l  
DULCOLYSE 100 100 250 1.10 210 stainless steel 1041424
DULCOLYSE 100 100 250 1.10 210 open cabinet 1062093
DULCOLYSE 200 200 500 1.50 210 stainless steel 1043987
DULCOLYSE 200 200 500 1.50 210 open cabinet 1062104
DULCOLYSE 300 300 750 1.90 210 stainless steel 1043988
DULCOLYSE 300 300 750 1.90 210 open cabinet 1062135

Scope of delivery:

DULCOLYSE electrolysis systems are fitted ready for use in a sealed stainless steel or open cabinet

  • PLC (Programmable Logic Controller) in the attached control cabinet
  • Duplex water softening system
  • Salt-dissolving tank with level monitoring
  • DULCOLEVEL radar sensor for the DULCOLYT product tank
  • Water hardness checking device
  • pH4 + pH7 buffer solution

Not included in the scope of delivery:

  • DULCOLYT product tank
  • DULCOLYT metering station