Contact Us
+90 216 342 7678
+90 216 DHA SMRT
Contact Us
+90 532 347 33 42
+90 532 DHA SMRT

Controller DULCOMETER DiaLog DACb

Do you wish for a simple controller for water analysis? One that is easy to operate and with which you can freely select between all common measured variables per channel? There is one: our all-rounder DULCOMETER diaLog DACb! What is more, it is Ethernet-/LAN-capable and can be ideally integrated into existing networks.

Water Parameter Analysis Made Easy – with the DULCOMETER DiaLog DACb

The controller DULCOMETER diaLog DACb is our compact all-rounder for water analysis. With its specially designed functionalities, e.g. processing of interference variables and switchover of control parameters, it closes the control circuit between DULCOTEST sensors and ProMinent metering pumps. The measuring and control channels of the DULCOMETER diaLog DACb can be individually configured to meet customer requirements. Everything that you need for the reliable treatment of industrial and process water, drinking water as well as swimming pool water.

Your Benefits

  • Simple operation thanks to a clearly arranged display
  • More for your money: two measuring and control channels now in the basic configuration
  • Versatile use: all common measured variables can be set per channel and subsequently altered
  • Control from anywhere: LAN-capable and convenient remote access via integrated web server
  • Maximum flexibility: individually adjustable to different operating statuses, e.g. day-night mode
  • Excellent process reliability: avoidance of incorrect metering through time-based monitoring of control variables

Technical Details

  • Measured variables: pH, ORP, chlorine, chlorine dioxide, chlorite, bromine, conductivity, peracetic acid, hydrogen peroxide, ozone, dissolved oxygen and fluoride
  • Installation, degree of protection: Combination housing (wall mounting, control panel mounting, pillar assembly) IP 67 and IP 66
  • Control: three measuring and control channels, each with independent monodirectional PID controller (optional: two bidirectional PID controllers)
  • 24 V DC protective low voltage supply e.g. by means of solar system or in the wet area of waterworks
  • Temperature compensation for pH and for chlorine dioxide process sensor CDP, pH compensation for chlorine
  • Digital inputs for the processing of control signals, e.g. of sample water limit contacts, remote stop control and to monitor the liquid levels in chemical storage tanks
  • Control outputs for electronically controlled metering pumps and solenoid valves
  • Interference variable processing: simple control of water parameters in flowing water by processing the flow in the control algorithm
  • Adaptation of the controller setpoint to changed process conditions is possible via remote control by means of the mA signal of a PLC or with more stringent requirements via the field bus option

Technical Data

Measured variables and measuring ranges

Connection type mV:
pH: 0.00 … 14.00
ORP potential: -1500 … +1500 mV
Type of connection mA (amperometric measured variables, measuring ranges corresponding to sensors):
Chlorine
Chlorine dioxide
Chlorite
Bromine
Ozone
Hydrogen peroxide (PER 1 and PEROX H-3E)
Hydrogen peroxide (PEROX H2.10 P with PEROX transducer V2 order. no. 1047979)
Peracetic acid
Dissolved oxygen
Type of connection mA (potentiometic measured variables, measuring ranges corresponding to transmitters):
pH
ORP potential
Fluoride:
via module VA and function upgrade package 3 and 4
Conductivity mA via sensor CCT 1-mA-20 mS/cm
Temperature:
via Pt 100/Pt 1000, measuring range 0 … 150 °C

Resolution

pH: 0.01
ORP voltage: 1 mV
temperature: 0.1 °C
amperometric analysis (chlorine etc.): 0.001/0.01 ppm, 0.01 vol.%, 0.1 vol.%

Accuracy

0.3% based on the full-scale reading

Measurement input

pH/ORP (input resistance > 0.5 x 1012 Ω)

Temperature compensation

Pt 100/Pt 1000 for pH, chlorine dioxide (CDP) sensor and fluoride

Correction range temp.

0…100 °C

pH compensation range for chlorine

Sensor CLE 3 and CLE 3.1: 6.5 … 8.5, sensor CBR: 6.5 … 9.5

Disturbance signals

Flow via 0/4 … 20 mA signal or contact water meter, 1 – 500 Hz. The multiplicative interference variable can influence all channels, while the additive interference variable only influences one channel.

Control characteristic

P/PID control

Control

2 or 3 bidirectional controls

Analogue outputs

2 (3) x 0/4 … 20 mA electrically isolated, max. load 450 Ω, range and assignment (measured, correction, control variable) can be set

Control outputs

2 (4) pulse frequency outputs for controlling metering pumps
2 relays (limit value or pulse length control)

Alarm relay

250 V ~3 A, 700 VA contact type, changeover

Digital control inputs

4 (7) as a remote control input for the functions pause control/sample water fault, parameter set switch-over, level monitoring of chemical tanks

Electrical Connection

100 – 230 V, 50/60 Hz, 25 VA, optional 24 V DC

Field bus connection

PROFIBUS® DP, Modbus RTU, PROFINET

Ambient temperature

0 … 50 °C (for use indoors or with a protective enclosure)

Enclosure rating

Wall-mounted: IP 66 and IP 67 (NEMA 4X)
Mounted in control cabinet: IP 54 for control cabinet door

Tests and approvals

CE and MET (corresponding to UL as per IEC 61010)

Housing material

PC with flameproofing equipment

Dimensions

250 x 220 x 122 mm (WxHxD)

Weight

1.3 kg

Standard equipment with basic measured variable

  • PID controller with pulse frequency-based metering pump control for 2 metering pumps.
  • 2 analogue outputs for measured value, correction value or control variable (depending on the optional equipment).
  • 4 digital inputs for sample water fault detection, level switch, pause and parameter switch-over.
  • 2 output relays can be programmed either as output for limit value, cycle timer, real-time timer or control output (depending on the optional equipment).
  • Measured variables and language selection during commissioning.
  • Temperature compensation of the pH, chlorine dioxide (CDP) and fluoride measurement via Pt100/Pt1000.
  • 24 operating languages: all European languages as well as Chinese, Russian, Thai, Korean. The operating language is selected during commissioning and can be changed at any time by a keyboard shortcut. The documentation language is selected via the identity code. A data carrier is also supplied that contains all other languages.
  • Device parametrisation is saved and transferred on an SD card.
  • Calibration and event data logger (without SD card, data is saved in the controller).
  • Interference variable processing (flow) via frequency (contact water meter).
  • Subsequent upgrade of the software function by means of an activation key or firmware update.

Description of the possible measured variables as basic measured variables:

Module VA mV/temperature + mA sensor input:

  • 1 sensor input for pH or ORP sensor and temperature sensor Pt100/Pt1000
  • 1 sensor input for connecting, e.g. chlorine sensors, such as CBR or pH transducer pHV1 and fluoride including interference variable or pH compensation for chlorine.

Module AA mA/mA sensor input:

  • 2 sensor inputs for connecting, e.g. chlorine sensors, such as CBR or pH transducer pHV1, including interference variable or pH compensation for chlorine.

Module VV mV/mV temperature sensor input:

  • 2 sensor inputs for connecting pH and ORP sensors and temperature sensors Pt100/Pt1000, e.g. of type PHER, RHER, PHEI, RHEIC, Pt100SE

Module L3 conductivity temperature sensor input:

  • 2 sensor inputs for connecting conductive conductivity sensors and temperature sensors Pt100/Pt1000, e.g. of type LFT, LMP

Optional equipment for third pH measuring channel

Package 2

  • Third measuring and control variable pH via mV or mA with or pH compensation for chlorine without external setpoint specification via analogue signal for channel 1 without flow interference variable via mA for channel 1
  • Third analogue output.
  • Three additional digital inputs, e.g. for level monitoring, pause and sample water alarm.
  • Control two additional metering pumps.

Package 3

  • Third complete measuring and control channel, any measured variable, with PID controller.
  • Third analogue output for measured value, correction value or control variable (depending on the optional equipment).
  • Three additional digital inputs, e.g. for level monitoring, pause and sample water alarm.
  • Temperature compensation of the pH, chlorine dioxide (CDP) and fluoride measurement.

Package 4

  • Combination of packages 2 and 3 (only one channel for amperometric sensors is available with the mA interference variable).

Communication options

  • Measurement data logger with SD card.
  • Visualisation of the measured data using a web server via LAN and PC/tablet PC and web browser.
  • PROFIBUS DP, Profinet or Modbus RTU.

Hardware upgrade

  • Protective RC circuit for output relay: Protects the output relay if inductive loads are to be switched (e.g. solenoid valves or motors). Not with 24 V DC electrical connector.

Controller DULCOMETER DiaLog DACb Kataloğu

Deha Smart

Meclis Mah. Atatürk Cad. B2 No:109 G İç Kapı No:13 Sancaktepe / İstanbul

Products

Corporate

Copyright © 2025 · Deha Smart – designed by prbasim.com