Flow Meter DULCOFLOW

For the measurement of pulsating volumetric flows within the range of 0.03 ml/stroke to 10 ml/stroke

The flow meter DULCOFLOW reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance as all wetted parts are made of PVDF and PTFE.

Your Reliable Control Unit: Unobtrusively Measures, Monitors and Detects Faults.

The device works on the ultrasound measuring principle. It was developed specifically for measuring small pulsating volumetric flows. It is installed around 30 cm downstream of the metering pump, so that there is still sufficient pulsation in the flow. All liquids that conduct ultrasound waves can be measured.

Your Benefits

  • Maximum chemical resistance by the use of PVDF and PTFE
  • No electrical conductivity of the medium is needed
  • Measurement above stroke volumes of approx. 30 µl
  • Detection of gas bubbles in the feed chemical
  • No bottlenecks in the measuring tube. Media with small undissolved particles or with increased viscosity can be measured
  • A 0/4 -20 mA current output and a frequency output are available for remote transmission of the measured values.

Technical Details

  • 2 LEDs for status display and stroke feedback
  • 2-line graphic display
  • 0/4-20 mA standard signal and 0 – 10 kHz frequency output for remote transmission of the measured value
  • Compact, chemically-resistant plastic housing
  • Measuring accuracy ± 2 % if the device has been calibrated to the chemical to be measured. Max. operating pressure 16 bar.

Technical Data

Type 05 Type 08
Max. operating pressure 16 bar 16 bar
Smallest measurable stroke volume Approx. 0.03 ml/stroke, pulsing Approx. 0.05 ml/stroke, pulsing
Min. pressure 3 bar 3 bar
Contact output with individual stroke detection Open collector, 1 contact per stroke Open collector, 1 contact per stroke
Frequency output Open collector, up to 10 kHz at maximum flow (parametrisable) Open collector, up to 10 kHz at maximum flow (parametrisable)
Analogue output Parameters can be set, max. load 400 Ω Parameters can be set, max. load 400 Ω
Type beta 1000 – 0413/0713, gamma/ X 1602 – 0414/0715, gamma/ XL 1608 – 1612 beta 1604 – 0420, gamma/ X 1604 – 0424, gamma/ XL 1020 – 0450, Sigma/ 1